What is a PTAC?

If you have ever stayed in a hotel, most topically heat and cool with little units that are inside of the rooms. What are those things though? Today we will go over that with you.

 

What’s a Packaged Terminal Air-Conditioner (PTAC)?

PTAC stands for”packaged terminal air conditioner” PTACs are single, commercial standard, self-contained units installed via a wall and often seen in hotels. A PTAC’s compressor program equally cools and heats. To trendy, the components blower pumps refrigerant to cool the coils that attracts warmth and humidity that’s then drained to the exterior. To warm, this operation is reversed. The refrigerant can be utilized to warm the coils, when air moves it over the device pushes the heated air into the space. PTACs are bigger than a normal through-the-wall air conditioner; the standard size is 42″ wide. PTACs are often viewed in the hospitality industry and are accepted for commercial use, however they are also acceptable for residential uses.

How can I select my PTAC unit?

The two important things to keep in mind would be BTUs and plug in type.

BTUs (British Thermal Units)

BTUs are components of power – the bigger the area that you want to trendy, the longer BTUs you want. It is important to find the ideal size. Buying a greater BTU air conditioner compared to the area dimensions demands is not suggested. It’s preferable to have the appropriate size air conditioner operate for more to correctly remove humidity in the area – find out more.

The Types of PTAC Plugs

There are two parts to plug in kind: voltage and amperage. As a rule of thumb the higher the amperage the greater the heating capability. PTAC units may be plugged into a receptacle or the device could be permanently attached (hard wired) to the building’s wiring. To hard wire your PTAC you’ll have to purchase a permanent connection kit (also referred to as a sub foundation kit) individually. If you’re replacing an existing device, then pick a PTAC using the same plug type to determine the ideal amount of amperage and voltage.

Which are the advantages and disadvantages of a PTAC unit?

PTAC units are valuable since they can effectively heat and cool a space from a single apparatus. PTACs are commercial standard durable components, however since they can be components 42″ broad you have to have a massive hole cut into a walls. PTACs have to get installed into an external sleeve having an outside grille which are both sold individually. PTAC units are normally more costly than window air conditioners, however if you’re planning to cool and heat a space then you can save up to 20 percent per year on power.

airflow for ptac unit

How can I install my PTAC device?

PTAC units have been installed via a gap in the walls. Often you’ll require a professional to assist (we used a friend of ours at www.lancasterheatingandair.com) with installing the device, sleeve, and grille. PTAC components cannot be installed with no sleeve as a wall is not powerful enough to hold the weight of the device.